How to Install Tiffany Ceiling Lights


Tiffany lamps are renowned for their exemplary stained-glass designs and timeless visual appeal. Installing one in your space can improve the aesthetic value of your room and elevate its ambiance.

Although the installation might seem complex, it is easier than you think, and you can do it yourself with the right tools and guidance.

You can install a Tiffany ceiling light by following the steps below:

  1. Collect your materials
  2. Remove old fixture
  3. Place the attachment
  4. Connect the wires
  5. Attach the fixture
  6. Secure the lampshade
  7. Attach light bulbs and turn on the power
  8. Make necessary adjustments

The step-by-step installation guide ensures that you firmly install your lamp safely. There are precautions you must adhere to for you to enjoy the unrivaled illuminated glow and classic look of your lamp.

The rest of the article extensively explains the steps of installing a Tiffany ceiling lamp and guide on giving it an elegant and remarkable touch.

Related reading: How to Choose the Tiffany Lamps?

How to Install a Tiffany Ceiling Lamp

Before you install a Tiffany ceiling lamp, cut the power by removing the fuse from the room where you want to install it. Alternatively, you can cut the general power supply into your room. Confirm that the power is off by operating the room switches, then remove the old fixture if in case it is already in place.  

Check whether your ideal location for the lamp has a peg, hook, or holes with screws, and check whether your ceiling lamp will be compatible with the fixing system of the lamp. You might be forced to drill a hole into your ceiling to install a hook or bar that you will use to hold your lamp.

The best way of installing your lamp is to be very careful in every step so that you do not break any part of your Tiffany ceiling lamp, especially its stained-glass shade. The shade might be too heavy, and it is important to have someone to assist you in holding it in place when you are working on the other parts and fixing it to the ceiling.

You will hang your lamp on a hook or from an electrical box installed to support the weight of your glass. To ensure your safety, use appropriate tools and materials and wear safety glasses to protect your eyes from debris and gloves to protect your hands.

After covering the safety basics and ensuring you are safe, follow the steps below to install your Tiffany ceiling light.

Related reading: How to Select the Tiffany Ceiling Lamps

1. Put Your Materials Together

Before you begin, gather all the materials and tools you will use to install your Tiffany ceiling lamp. Have them in one place to save time and minimize interruptions during installation.

Ensure you have all the fixtures of your lamp, a ladder, pliers, electrical tape, wire nuts, wire stripper, screwdriver, gloves, and safety glasses. Wear the gloves and put on your safety glasses to protect your eyes from the debris falling from the ceiling.

2. Remove the Old Tiffany Ceiling Lamp

If you are replacing an old lamp, start by removing it from the ceiling of your room.

Unscrew and remove any screws and bolts holding it to the ceiling.

Lower the lamp slowly to expose the electrical wiring, and use the screwdriver to disconnect the wires. You can do so by unscrewing the wire nuts and separating the wires from the old lamp from the electrical box on your ceiling.

Identify and label the wires; in most cases, the wires are categorized as hot, neutral, or ground. The colors can help you identify the wires. For example, hot is usually red or black, neutral is white, and ground is mostly bare and green.

After you disconnect the wires, remove the old lamp and set it aside.

3. Place the Attachment

Some Tiffany ceiling lights come with a mounting bracket that you can use to attach securely to the electrical box in the ceiling of your room. If your lamp has a mounting bracket, hold it to the electrical box in the ceiling and align the screw holes.

Fix the provided screws in the holes on your ceiling and tighten them using a screwdriver. Tighten them to ensure the bracket is attached securely to the box and ensure it is level.

If the lamp has no mounting bracket, drill a hole near the electrical box on your ceiling and fix the hook or bar. The hole is where you will hang your lamp for support.

You can use a hook or fixing bar to hang your Tiffany ceiling lamp on the ceiling of your room. Compare the size of the holes drilled on your ceiling with the spacing of the screws in the fixing system.

If the hole is bigger, use a new metal bar of the right size. Get the measurements and drill holes of the right size in the ceiling opening.

4. Connect the Wires

After fixing the bracket or placement, connect the wires from your Tiffany ceiling light to the wires in the electrical box. Strip the wires over a length of 1.5cm and do it safely and correctly by matching the wires based on their colors and purpose.

In this regard, connect your lamp’s black or red wire to the black or red wires from the electrical box. Also, connect the white wire from the lamp to the white wire from the electrical box on your ceiling.

Connect the lamp’s green or bare wire to the box’s green or bare wire. Once you connect the corresponding wires, twist them to ensure they are tightly connected.

Also, twist the exposed wire ends, then secure them with a wire nut. Ensure you hold the connections tightly together.

Alternatively, you can place the twisted wires under a connection cap or use a domino. You can also use a plastic part with screws that tighten and hold the wires in contact position.

After securing every connection with a wire nut, wrap it with electrical tape for extra insulation and protection.

5. Attach the Fixture

Follow the manufacturer’s instructions and attach the Tiffany ceiling lamp to the mounting bracket that you already put in place. The process varies depending on your specific fixture. For example, if you are using screws, use them to fasten the lamp to your ceiling.

If the lamp is suspended on a chain, attach the chain to the hook that you installed earlier on your ceiling. Attach it firmly with the help of your assistant.

6. Secure the Lampshade

Attach and secure your Tiffany lampshade such as the one shown below to the mounting bracket. Carefully align its holes with the screws on the bracket.


Tiffany lampshade

Gently screw the lampshade in place and ensure it is securely attached to the ceiling of your room.  Tighten the decorative finial or cap on your lampshade to ensure proper attachment.

7. Attach Light Bulbs and Turn on the Power

Once all your connections are securely in place, install your preferred light bulbs into the lamp’s socket. Choose your bulb according to the wattage of your lamp. Use the bulb of the right size as indicated in the installation instructions.

For example, you can use LED bulbs shown below if you do not want any heat emissions in your space or you want energy-efficient and durable bulbs.


LED bulbs

After fixing the bulb, turn on the light switch to test the power and lamp. You can do so by switching the power back from your circuit breaker. Once you turn on the light, you turn on a world of beauty, intricate and harmonious combination.

Related reading: Why do the LED lights keep flickering: Solutions

8. Make the Necessary Adjustments

Now that you have installed and powered on your Tiffany ceiling lamp you can make any adjustments if need be. Ensure your lamp is level and properly aligned with your room’s decorative appearance.

Ensure the multiple stained-glass pieces are fixed properly for the best visual impact. If the light is not working properly, double-check your connections and refer to the manufacturer’s manual for troubleshooting.

Once you are satisfied with the installation, take a soft cloth and gently dust and clean the Tiffany lampshade such as the one shown below to restore its beauty and luster.


Tiffany ceiling lamp

Then sit back, relax, and enjoy the inviting and warm ambiance that your new Tiffany ceiling lamp introduces to your space.


Installing a Tiffany ceiling light or a Tiffany-style flush mount ceiling lamp is a simple process that requires basic tools and adherence straightforward steps.

Careful attention to the instructions ensures successful installation, which subsequently introduces beauty and magnificence to your space. The process is rewarding and infuses aspects of style and functionality into your home.

As much as you follow the step-by-step guide, prioritize your safety while transforming your space with the timeless excellence of Tiffany ceiling lighting.

In case you are uncomfortable with electrical work, it is best to consult a licensed electrician for expert assistance. Once your Tiffany ceiling lamp is installed, it will give your home a unique and unmatched glow for a long time.

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered
Recently Viewed